Anyone got any good Raymond Mays head yarns? I wonder where they all went.
Attachment 42373
Attachment 42375
Attachment 42376
Printable View
Anyone got any good Raymond Mays head yarns? I wonder where they all went.
Attachment 42373
Attachment 42375
Attachment 42376
There's one on the Eclipse Zephyr, it does a good job...
And there's a Consul version on a sports car which used to run in South Australia.
I have some photos somewhere, on and off the car IIRC.
I know someone in Kerikeri who has more than one.
From what I have heard they weren't the best castings so I guess a lot of them were scrapped as unusable. I have seen one which had been planed so much that the spark plug threads came into the face.
Pretty serious reclamation work going on here.
Attachment 42377
Last year I got one of the reproduction heads from UK and it always brings out a yarn or two about the legends of the time who raced with one or had triple carbs etc. I really enjoy these stories.
BCE , I can easily remember the big wooden crate that Ernies Raymon Mays Cyl head arrived in , it hung around his work shop for years , it was well made , had little packing compartments etc also holes drilled in the wood that housed the light weight push rods etc .
I found some interesting Raymond Mays information at this site.
http://www.thehodgkinsons.org.uk/ERA...onversions.htm
Attachment 42379
Remember playing with Mk11 had Mays head, triple carbs, Bedford pistons (machined little) balanced rods, oil pump upgrade (stronger spring) etc. it was a quick bit of gear, and of coarse the impala straight shift (forward and back)
got photo somewhere of one of the more famous NZ Mk11s will find it.
This example was advertised on TradeMe a few years ago - it sold for very good money I believe.
Attachment 42397
Attachment 42398
Attachment 42399
The one on the Eclipse Zephyr, I now recall, was bought by Repco...
They purchased it when they (Phil Irving?) were planning the Repco Hi-Power head for the grey Holden engines. They had done their bit with it and Keith Rilstone was starting me the Eclipse Zephyr fly. He got them to upgrade the brakes (through the PBR) subsidiary and then they gave him the head.
Thanks Steve. I've had it on the Mk2 wagon for about six months now, initially with two H6 carbs,
Attachment 42403
now with lots more
Attachment 42404
Looks like it had a well earned life. Those inlet flanges are modified to take something unoriginal, understandable as the stock bolt pattern is virtually impossible to mount anything other than the log type manifold because the bolts are painfully close to the runners. The plug threads aren't quite breaking through into the head face but they are darn close.
There's a guy out west Auckland who was wanting 20k for one on TM a year or two back. The repro ones are half that even with freight from UK and they have made a number of subtle improvements so they are (seem) very reliable.
Thanks guys, enjoying the thread.
Attachment 42406
This one haunted the North Shore way back, was a very quick car and the local cop loved it, mainly because he could hear it coming from Milford and he was at top of Forrest Hill.
PS it was very quick because it was red.
A nice pair of Zodiacs...
https://s26.postimg.org/d37eqywc9/0317frzodiacvert.jpg
Both have an American option between the engine and the final drive, the sedan has a DG while the auto has the other type of Borg-Warner componentry offered on the Z-cars:
https://s26.postimg.org/qmsuaezp5/03...coverdrive.jpg
The sedan has these headers in place of the usual log...
https://s26.postimg.org/qvltmln3t/03...iacheaders.jpg
...while the convertible has this:
https://s26.postimg.org/6zpu7262h/0317frzodiacbadge.jpg
And it's now got this:
https://s26.postimg.org/6qwuuvint/03...acmayshead.jpg
Which should go very will with that 0.7:1 overdrive.
Rod, that fuel system looks like a fire hazard! SU fuel pump over by the steering column feeding all the way round the firewall to some manifold thing on the other side. Those mufflers are something else altogether. Great pics.
Ray, the pics didn't come through on my screen.
Steve, some pics here https://www.flickr.com/gp/57330657@N05/i98RH4
Attachment 42430
Try opening them this way:
https://s26.postimg.org/d37eqywc9/0317frzodiacvert.jpg
https://s26.postimg.org/qmsuaezp5/03...coverdrive.jpg
https://s26.postimg.org/qvltmln3t/03...iacheaders.jpg
https://s26.postimg.org/6zpu7262h/0317frzodiacbadge.jpg
https://s26.postimg.org/6qwuuvint/03...acmayshead.jpg
If necessary, copy and paste to a window.
BCE , if you click on to "sprague family photos" go to page 11 you will see Ernie tuning carbs on his Mark 3 replica racing zepher with the Raymond Mays Cyl head