Today's job has been temporarily tying the front suspension turrets together as a unit to enable me to work out how to mount it into the frame, I used some measurements from a Herald that I had access to here in Waimate and I found a factory chassis drawing on line with the dimensions I needed to set them up in relation to one another. Some 10mm threaded rod inside alloy tube fitted through the chassis mounting bolt holes gave me the right width at the bottom and some alloy channel with some holes drilled through fitted to the top A arm bushing bolts set the top width. I should be able to work out the best way to mount them by fitting the whole unit into the frame and measuring them in relation to one another.