MSNZ - Schedule K and T&C and maybe FIA HTP related questions info etc

[Parnelli]

Hi nzeder, I’m fairly new to all this Schedule K, T & C, HTP , COD and so question the relevance of this revenue generating bureaucratic bull…. so thanks for starting this thread, I’m sure we can all learn from others experience with these matters. I can see the necessity for historic , period correct cars that wish to race internationally , but for the rest of us that just want to get out there and have some fun then, why should we bother getting involved ? If ERC can run his series for so long with consistently large grids , then perhaps we all need to adopt to KISS principle to our racing.

[Allan]

Would someone who has the patience to read and try and understand the rule book sort out what of the following is allowed and where this car would fit into the various classes and schedules.
The car is Italian 1971 with 1600cc dohc engine, 5 speed transmission 4 wheel solid disc brakes as standard equipement.
The normal modifications for "say" Targa/club type events would be:-
2000cc dohc motor (modified but not dramatically) 2 x 40/45 DCOE replacing the original 2 choke down draft, different camshaft profile, ignition from same manufacturer 1975 on etc
5 speed transmission from 1975-83 same manufacturer but different model
The differential is Japanese
The front rotors are larger and vented (late 1980s) the rears solid although larger.
The calipers are 1990s from the same manufacturer
Caged with MSNZ approved seats and harnesses etc
So apart from the Japanese differential the entire mechanicals of the car is from the same manufacturer although not necessarily the same model. The reasons, like those of most car builders, for the mods are to make it go, make it stop, make it safe and make it reliable.
Any thoughts?
Allan

[Carlo]

Would someone who has the patience to read and try and understand the rule book sort out what of the following is allowed and where this car would fit into the various classes and schedules.
The car is Italian 1971 with 1600cc dohc engine, 5 speed transmission 4 wheel solid disc brakes as standard equipement.
The normal modifications for "say" Targa/club type events would be:-
2000cc dohc motor (modified but not dramatically) 2 x 40/45 DCOE replacing the original 2 choke down draft, different camshaft profile, ignition from same manufacturer 1975 on etc
5 speed transmission from 1975-83 same manufacturer but different model
The differential is Japanese
The front rotors are larger and vented (late 1980s) the rears solid although larger.
The calipers are 1990s from the same manufacturer
Caged with MSNZ approved seats and harnesses etc
So apart from the Japanese differential the entire mechanicals of the car is from the same manufacturer although not necessarily the same model. The reasons, like those of most car builders, for the mods are to make it go, make it stop, make it safe and make it reliable.
Any thoughts?
Allan

Have a look at Schedule RH, it may suit your purpose better

[Allan]

Thanks Carlo.

[ERC]

The normal modifications for "say" Targa/club type events would be:-
2000cc dohc motor (modified but not dramatically) 2 x 40/45 DCOE replacing the original 2 choke down draft, different camshaft profile, ignition from same manufacturer 1975 on etc 5 speed transmission from 1975-83 same manufacturer but different model
The differential is Japanese
The front rotors are larger and vented (late 1980s) the rears solid although larger.
The calipers are 1990s from the same manufacturer
Any thoughts?
Allan

My thoughts are that it is perfectly OK in the ERC Series - without any documentation...

[Allan]

Thank you also ERC. That's more like what I wanted to hear. It wouldn't fit into schedule RH as I read it.
Like many people thinking about building some sort of competition car I really need to know what is acceptable to the various series that exist in NZ so as not to turn up only to be turned away because I didn't do my homework first.
Allan

[Oldfart]

Thank you also ERC. That's more like what I wanted to hear. It wouldn't fit into schedule RH as I read it.
Like many people thinking about building some sort of competition car I really need to know what is acceptable to the various series that exist in NZ so as not to turn up only to be turned away because I didn't do my homework first.
Allan

I think you have answered your own question in the last phrase!
Targa (having been on 10) will allow almost anything, you just need to declare and you will be classed. Be prepared that a number of classic competitors are getting tetchy about the "hot rods" which are a mish mash of bits and would like most "classic" to revert to period components, with the appropriate wheels, tyres, brakes, gearboxes etc. Seats, roll cages are a different issue. In regard series, you need to check where you want to run, conform and if you don't want to conform, accept that they may not want you. It's your choice.

[nzeder]

Would someone who has the patience to read and try and understand the rule book sort out what of the following is allowed and where this car would fit into the various classes and schedules.
The car is Italian 1971 with 1600cc dohc engine, 5 speed transmission 4 wheel solid disc brakes as standard equipement.
The normal modifications for "say" Targa/club type events would be:-
2000cc dohc motor (modified but not dramatically) 2 x 40/45 DCOE replacing the original 2 choke down draft, different camshaft profile, ignition from same manufacturer 1975 on etc
5 speed transmission from 1975-83 same manufacturer but different model
The differential is Japanese
The front rotors are larger and vented (late 1980s) the rears solid although larger.
The calipers are 1990s from the same manufacturer
Caged with MSNZ approved seats and harnesses etc
So apart from the Japanese differential the entire mechanicals of the car is from the same manufacturer although not necessarily the same model. The reasons, like those of most car builders, for the mods are to make it go, make it stop, make it safe and make it reliable.
Any thoughts?
Allan

With out knowing the model and no research I could not comment on FIA HTP or Schedule K as both are based on the same principle and for FIA HTP that is what was homologated in the period the car fits into. Schedule K is same. Things become tricky when there are not FIA homologation papers to build to.

This is where I think we are lucky here in NZ we have Schedule T&C - which I will now see if I get this right.

T&C rules are basically a really good platform for most classic racers - it has some flexibility but then is tight on other areas.

The principle is take a standard series production car be it a Saloon or Sports/GT leave the body work 100% standard leaving all bumbers, bright work etc - but then allow modifications to the selected model based on the rules set in the out in T&C. Over the years however there has been a lot of mis-interpretation of the rules. MSNZ has during this time re-written/worded the rules to make it clearer as to what the principles are. However I believe there is still a lot of confusion with regards to T&C. Let me see if I can get this right.

First an opinion - I feel that some areas in any form of motorsport car preparation should be not negotiable. I believe that replacing standard rubber brake hoses with a braided hose should be compulsory just on the grounds of safety - much like your comment about make it stop Allan.

T&C is I feel very clear also - Pick your car example a Ford Mark I Escort. The model you might purchase is a 1300 but you might feel that you would to race a RS2000 - so under T&C you can do this as it is in the same model series. Again as the cars in question are mass produced ie more than 1000 examples manufactured over a 12 month period - if the model you select does not meet this then you need to turn to FIA Appemdix K HTP or Schedule K COD and see if the model can fit under a period replica/fresh build to the FIA homologation of the model in question = lots or research to get the proof such a car did run in the configuration you require as that is outside of T&C which must be based on a standard production car - so something like a Hobay Escort does not fit T&C as that car was not sold to the general public - it is a FIA special, a period race car so needs to be built to FIA homologation under FIA Appendix K HTP or Schedule K COD.

I have not read the rules on Schedule RH or CR or others - I so far have only researched K and T&C.

So under T&C your now selected RS2000 Mk1 (made from a 1300 2 door) needs to have all the original body work as fitted and sold on the RS2000 - so if that means GT front steel guards then you should be sourcing some of those if the RS2000 only came with those (I don't know escorts so if I am wrong please correct me - again I am Nissan S30 aka Datsun 240z/260z/280z Fairlady Z, Fairlady 240Z, Fairlady 240ZG, Fairlady Z432 and the Fairlady Z432-R all the same chassic different markets/models/specs and some different options/configurations). You can now modify the RS2000 as permitted in the rules - 15" max under T&C, no front spoilers, only factory rear spoilers (so no homologated special parts, bubble flares etc these are non standard body parts - not fitted or sold to the standard production cars). Engine can be enlarged, cams changes, etc - all this is very clear in the rules. Suspension and brakes can be modified/changed as stated in the rules. However the key is these changes my have been available and carried out on a RS2000 somewhere racing in the world and be proven these suspension/brake mods were carried out.

I think if they can't be proven but you know it could have been done then I think Schedule CR is what you can look at for a retrospective replica/special.

So that is how I read the T&C rules - it is not an anything goes, it is if it was done it can still be done.

I don't think using a modern rotor is an issue - for example take my car a Datsun Z - if I build to K car spec the FIA approved brake setup can't be replicated today with new parts as they are NLA (no longer available), rotors can't be purchased, second hand calipers can be purchased and seal kits for them are still available. So I assume the FIA and others like MSNZ would allow a suitable replacement if dimensionally correct. ie say a car was homologated with a 276x20mm rotor but that is NLA but you could modify a BMW E36 rear rotor to fit which is 276x19mm then that should be acceptable and this is even covered in the FIA Appendix K rules - parts can be replicated if the material/process of manufacturing and dimensions are the same.

I am sure if budget was no issue you could have a foundry make new rotors to the correct dimensions etc...however I am sure most would be fine with a suitable substitute.

So that is how I read the T&C rules - must be based on standard production model range using the standard body - much like Schedule K and FIA Appendix K for Series Production (Saloons) and Standard Production Sport & GT. However you are not limited to the FIA Homologation for these standard base models - ie if only homologated with downdraft carbs then that is how it is to stay in a K car config - however T&C allow the fitment of DCOE if this was done in period aka if that was done to a Competition Touring Car - without having to conform 100% to the FIA homologation for the model as a Competation Touring Car - so it is more like a 1/2 way point - a little more scope than a FIA Group 1 or Group 3 homologated car but does not have to be as 100% like the Group 2 or 4 etc.

[RacerT]

Would someone who has the patience to read and try and understand the rule book sort out what of the following is allowed and where this car would fit into the various classes and schedules.
The car is Italian 1971 with 1600cc dohc engine, 5 speed transmission 4 wheel solid disc brakes as standard equipement.
The normal modifications for "say" Targa/club type events would be:-
2000cc dohc motor (modified but not dramatically) 2 x 40/45 DCOE replacing the original 2 choke down draft, different camshaft profile, ignition from same manufacturer 1975 on etc
5 speed transmission from 1975-83 same manufacturer but different model
The differential is Japanese
The front rotors are larger and vented (late 1980s) the rears solid although larger.
The calipers are 1990s from the same manufacturer
Caged with MSNZ approved seats and harnesses etc
So apart from the Japanese differential the entire mechanicals of the car is from the same manufacturer although not necessarily the same model. The reasons, like those of most car builders, for the mods are to make it go, make it stop, make it safe and make it reliable.
Any thoughts?
Allan

Hi Allan. It's good to get an actual case study. I presume your car is a FIAT? All the mods are acceptable under T&C except perhaps the engine size? Did your model of car have an 1800 cc derivative, because the maximum increase in size allowed is 12 1/2% for T&C?

[nzeder]

Hi nzeder, I’m fairly new to all this Schedule K, T & C, HTP , COD and so question the relevance of this revenue generating bureaucratic bull…. so thanks for starting this thread, I’m sure we can all learn from others experience with these matters. I can see the necessity for historic , period correct cars that wish to race internationally , but for the rest of us that just want to get out there and have some fun then, why should we bother getting involved ? If ERC can run his series for so long with consistently large grids , then perhaps we all need to adopt to KISS principle to our racing.

My only reply to that is reading the rule book if any event is run/held under MSNZ Appendix 6 then cars running need to have a COD ie be classified as Schedule K, T&C, CR etc. If a meeting he held under Appendix A then it is a clubman type event and then anything goes it is clubmans racing as I once heard from a HRC member. However girds sometime also have a set of rules to run under - ie BMW etc to have good safe grids without large speed differential.

I like handicap racing - it is a leveller, fun and if all respect each cars and ability then everyone finishes after all we are talking about cars that finding parts/panels are becoming harder and harder and more costly. There is no reset like on a Playstation and all is damage is gone.

I do agree with the KISS approach - and if you look at T&C it is a very KISS set of rules - it is clear so I don't see how there are so many "hot rods" racing. The issue we see with T&C today is with existing cars - that have been modified outside of the rules as they are today ie not trying to pick on a bubble flared escorts but that is just not a standard production body - not matter what rule book you read - yes homologated under some FIA group but that does not mean it fits T&C

It would be like if I built a Datsun 240z to full Group 4 Spec with all the Group 4 body work - here is a picture then try and run that under T&C = epic fail it is not standard production body work. However the next picture is a standard Datsun 240z well in this case a Fairlady 240zg which was used to homologate the longer nose and flares in Group4 -so the top pic = not T&C but the bottom is as that is the standard production body work.
1975/76 Le Mann Datsun 260Z - period race car aka K car

1972 Fairlady 240ZG - production car

[Barry]

It is encouraging to see there are people that take the time to read the rules before they build a car rather than build one and try to get the rules changed to suit.
This will be a great thread for people to understand the K,T&C rules and where they apply, you can still build cars for series rules but if you want to build one to race in Classic or Historic racing read the rules first and save yourself and the commission a lot of problems later.